Skip to main content

NS2 Scenario Generator - Lecture 7

Image
By
If you are tired of writing code using .tcl files, here is a solution for that. This software is a little bit old, as it released sometime during 2007, still some of the students/Researchers are not aware of this software.
So, you need not waste your time in editing the tcl files. And since this software is written in java, it works well with almost any Operating System (With JRE installed on the System).

Refer this video for more information



You can download the software from this link https://sites.google.com/site/pengjungwu/nsg
Some features of this software

  1. wired and wireless nodes will be created
  2. establish connection between the nodes
  3. Creating links (Duplex-Link and Simplex-Link)
  4. TCP and UDP agents are supported
  5. Creating applications (CBR and FTP)
  6. Node movement
And still there are lot more as the developer of this software is actively maintaining the software and you can expect lot more in the future also.

You can download the software from this link directly. https://sites.google.com/site/pengjungwu/nsg/NSG2.1.jar?attredirects=0

To run this file, type the command in any OS
java -jar NSG2.1.jar

Here is the screenshot of the Application

NSG

NSG2.1


Labels:

Comments

  1. Anuj GandhiNovember 2, 2019 at 2:02 PM

    will it work for windows OS?

    ReplyDelete
  2. Anuj GandhiNovember 2, 2019 at 2:03 PM

    will it work for windows?

    ReplyDelete
  3. Farhan JavedDecember 28, 2021 at 8:52 PM

    At 10:10 minute, on giving command of ns , it give the error of "Segmentation fault" and nam animation does not appear, its UBUNTU 20.04 and NS 2.35

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

By
In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libc...
1 comment
Read more

Installation of NS2 (ns-2.35) in Ubuntu 20.04

By
Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes ...
19 comments
Read more

Simulation of URDF, Gazebo and Rviz | ROS Noetic Tutorial 8

By
Design a User-defined robot of your choice (or you can use the URDF file) and enable the LIDAR Scanner so that any obstacle placed on the path of the light scan will cut the light rays. Visualize the robot in the Gazebo workspace, and also show the demonstration in RViz.   (NB: Gain knowledge on wiring URDF file and .launch file for enabling any user-defined robot to get launched in the gazebo platform.) SLAM : One of the most popular applications of ROS is SLAM(Simultaneous Localization and Mapping). The objective of the SLAM in mobile robotics is to construct and update the map of an unexplored environment with the help of the available sensors attached to the robot which will be used for exploring. URDF: Unified Robotics Description Format, URDF, is an XML specification used in academia and industry to model multibody systems such as robotic manipulator arms for manufacturing assembly lines and animatronic robots for amusement parks. URDF is especially popular with users of the ...
Post a Comment
Read more